FAQ

FAQ

Problem	Possible Cause	Possible Solution
Suction decreases	Blocked flexible hose	Gently remove obstruction using a long stick
	Blocked extension suction tube	Gently remove obstruction using a long stick
	Tank has reached 2/3 full or is completed full with waste and debris	Completely empty tank
Noise of vacuum changes and suction decreases	HEPA filter dirty and clogged	Clean the HEPA filter regularly by carefully patting it and cleaning it with a fine brush or hand brush (not supplied). If suction continues to decreases after cleaning the filter, replace with a new HEPA filter.
	Foam filter is dirty and clogged	Clean the foam filter with a little soft soap under running water. If suction continues to decrease after cleaning the filter, replace with a new foam filter.
	Tank has reached 2/3 full or is completed full with waste and debris	Completely empty tank
	Wrong filter has been used	Use the correct filter for the application at hand. Follow all warnings and instructions provided in this user manual
Appliance will not operate when the power tool is switched on	Incorrect ON/OFF switch mode selected	Select the Automatic Mode “II” in the ON/OFF switch
	Faulty power cord or faulty mains outlet	Plug appliance into another mains outlet . If it doesn’t work, the power cord must be replaced by a certified electrician using identical replacement parts
Appliance does not turn on	Faulty power cord or faulty mains outlet	Plug appliance into another mains outlet . If it doesn’t work, the power cord must be replaced by a certified electrician using identical replacement parts