Home » News » Application » How to check the malfunction of the swimming pool vacuum cleaner?

How to check the malfunction of the swimming pool vacuum cleaner?

Views: 0     Author: Site Editor     Publish Time: 2022-05-27      Origin: Site

The swimming pool vacuum cleaner is a product that can be used specifically for underwater cleaning. It is generally used to absorb dirt at the bottom of swimming pools and fish ponds to remove silt, hair, and other dirty things. So how does the swimming pool vacuum cleaner check for malfunctions? Next are some methods.

Here is the content list:

How to check the malfunction of the general swimming pool vacuum cleaner?

How to check the malfunction of the negative pressure swimming pool vacuum cleaner?

How to check the fault of the positive pressure swimming pool vacuum cleaner?


How to check the malfunction of the general swimming pool vacuum cleaner?


When the swimming pool vacuum cleaner is not moving, please check whether the power indicator light is on and whether the temperature of the transformer rises. After confirming that they are open, check the motor part in the water to see if the water is sprayed from the pump so that you can know whether the electricity reaches the motor part of the swimming pool vacuum cleaner. Then check whether the belt pulley is running in the east part of it, so that you can determine whether the motor is short-circuited or damaged, and at the same time determine whether to replace the motor, whether the belt on the driver is tight enough, whether the belt is out of the groove or flat, and needs to be replaced or not. Do not move or take out the motor by pulling the power cord. Try to approach it back as much as possible, and handle it with your hands directly. If the swimming pool vacuum cleaner will move, but the pump does not work and cannot vacuum, let it float nearby. The surface of the water, check if there is water gushing from the surface. If not, the motor of the swimming pool vacuum cleaner may be short-circuited. Please unplug the power supply, take out the motor and send it to the manufacturer for repair. In addition, if the original design is capable of climbing the wall, but it does not climb, please notify the manufacturer to deal with it on site.


How to check the malfunction of the negative pressure swimming pool vacuum cleaner?


The negative pressure swimming pool vacuum cleaner itself comes to the circulation system as an automatic machine for vacuuming. Usually, a vacuum pipe is connected to the suction hole of the surface cleaner, as the power source for pumping water, and the filter of the swimming pool is used to remove the dirt. This kind of random and safe operation will pass the larger debris through, the dust suction pipe stays in the leaf basket of the water surface cleaner. And the smaller debris is retained by the filter. When the swimming pool vacuum cleaner is not moving, please make sure that the circulatory system is open, and check whether the pressure of the filter is reduced. You can see whether the suction pipe, hair remover, and leaf basket are blocked. If it is normal, check whether the different types of drives are jammed by sundries, and by the way check whether the suction port of the surface cleaner is detached. Sometimes leaves will hinder the flow of water and slow down the travel speed. The rupture of the vacuum tube will cause air to run into the filter and form bubbles on the water surface. When cleaning debris, please carefully check whether there are any parts contained in it.


How to check the fault of the positive pressure swimming pool vacuum cleaner?


The positive pressure swimming pool vacuum cleaner is a hose connected to the water outlet of the swimming pool, the water pressure is used as the driving force for walking, and the differential pressure function of the vent tube is used to make sediment. The collective action leaves the debris on different collection nets. The main control elements are the sweeper tail, thrust jet, and flow regulator or pressure regulator. When the swimming pool vacuum cleaner is not moving, please make sure that the circulatory system is open, and then check whether the flow regulator or pressure regulator is within the recommended range and whether the spray outlet is in close contact. If the net bag of the swimming pool vacuum cleaner has too much debris, it will go faster, and the sweeping action of the tail rudder will be fierce. If there is a fault with the driver, it will rotate in place.

Suzhou Wise Mechanic Electric Appliance Co., Ltd has been working as a swimming pool vacuum cleaner for many years. If you are interested in our high-quality products, you can contact us. Our website is http://www.wisemechanic.com.


MAIN PRODUCTS

SEND US A MESSAGE

Please Enter Your Information

If you have any questions, you can contact us through the form.

Quick Links

Home

Download

Products

Vacuum Cleaner

Contact Us

   +86-13962147856

 

Copyright  2021 Suzhou Wise Mechanic Electric Appliance Co., Ltd    |    Supported  by  leadong.com